Basic Info.
Application
Transportation Project, Hydraulic Project, Geotechnical Project, Environmental Project
Feature
Puncture Resistance, Impact Resistance, Tear Resistance
Product Name
2.0mm HDPE Geomembrane
Usage
Pond Liner, Canal Linings, Tank Linings, Raw Water
Package
PP Woven Fabric or PE Film
Trademark
Jiantong or OEM
Transport Package
PP Woven Fabric
Specification
5.8m*100m per roll
Origin
Shandong Province China
Product Description
1.0mm/1.5mm/2.0mm/2.5mm geomembrane white blue black PVC pond liner construction material for Wastewater treatment lagoon, secondary containment
HDPE Geomembrane/ Fish pond liner
The geomembrane/fish pond liner comprises high-density polyethylene particles with a smooth surface, non-toxic, and tasteless.
The excellent water quality significantly promoted fish growth, shortened the breeding cycle, and increased productivity. It can increase fish production by two to three times.
Laying geomembrane at the bottom of the fish pond can isolate microorganisms and pathogens from the base soil, effectively preventing water pollution.
1. Saving time and labor
The smooth surface of geomembrane makes it easier to clean and disinfect the bottom of the fish pond;
- 2. Control water quality:
Laying geomembrane at the bottom of the fish pond can isolate microorganisms and pathogens from the base soil, effectively preventing water pollution.
3. The fish pond insulation effect is good.
The geomembrane has small permeability, little exchange capacity with groundwater, and a fast rise in water temperature. The temperature of the fish pond covered with geomembrane rose faster than that of the traditional earthy fish pond.
How to produce geomembrane
100% Virgin Resin
Special resin for geomembraneNormal geomembrane:
HDPE geomembrane is made of 97.5% of HDPE and 2.5% of Carbon black
Customized Geomembrane
Different formulas are used according to other climate conditions in different regions to meet your customized needs fully.
2. Triple co-extrusion technique by the most advanced automatic Blow film equipment. According to GM13, ASTM, and ISO standards.
Product Parameters
Tested Property | Test Method | Frequency | Minimum Average Value | |
| 0.50mm | 0.75mm | 1.00 mm | 1.50 mm | 2.00 mm | 2.50 mm |
Thickness (minimum average), mm Lowest individual reading | ASTM D 5199 | every roll | 0.50 0.425 | 0.750 0.675 | 1.00 0.90 | 1.50 1.35 | 2.00 1.80 | 2.50 2.25 |
Density, g/cm3 | ASTM D 1505 | 90,000 kg | 0.940 | 0.940 | 0.940 | 0.940 | 0.940 | 0.940 |
Tensile Strength at Break, N/mm Strength at Yield, N/mm Elongation at Break, % Elongation at Yield, % | ASTM D 669
| 9,000 kg | 13 7 700 12 | 20 11 700 12 | 27 15 700 12 | 40 22 700 12 | 53 29 700 12 | 67 37 700 12 |
Tear Resistance, N | ASTM D 1004 | 20,000 kg | 60 | 93 | 125 | 187 | 249 | 311 |
Puncture Resistance, N | ASTM D 4833 | 20,000 kg | 160 | 240 | 320 | 480 | 640 | 800 |
Carbon Black Content, % (Range) | ASTM D 603*/4218 | 9,000 kg | 2.0 - 3.0 |
Carbon Black Dispersion | ASTM D 5596 | 20,000 kg | Note(1) | Note(1) | Note(1) | Note(1) | Note(1) | Note(1) |
Notch Constant Tensile Load, hr | ASTM D 5397, | 90,000 kg | 300 | 300 | 300 | 300 | 300 | 300 |
Oxidative Induction Time, min | ASTM D 3895, | 90,000 kg | >100 | >100 | >100 | >100 | >100 | >100 |
Application
- Municipal environmental projects, water conservancy projects
- Landfill cap(closures), mining heap leach pads
- Pond liner, canal linings, tank linings, raw water treatment reservoirs, retention ponds,
- Wastewater treatment lagoon, secondary containment
- solid waste landfills, Hazardous waste landfills
Packaging & Shipping
Factory Inspection
Customer factory inspection and Exhibition
Certifications
1. Regularly or as you requested, we entrust national testing agencies to conduct quality inspections
2. Strictly following the ISO9001-2008 international quality system standard, we monitor and manage the whole process throughout production, quality testing, and measurement to ensure product quality
3. We have refunding, replacement, and repair services for quality-related construction delays or substandard construction(except for damage or losses due to the customer's responsibility or irresistible natural disasters). We will respond to customers' feedback on quality issues within 24 hours.
After-sales service
1. To provide customers with comprehensive technical support, we will promptly provide technical and other related information upon request.
2. As required, we will appoint specialized technicians to the construction site to give technical training to construction people and offer technical guidance throughout the whole construction process.
3. For damage due to shipment and delivery, we will check the issue through provided pictures and videos after receiving the complaint. If our responsibility is confirmed, we will offer free replacement.
4. When the construction is completed, as your request, our technical staff may participate in the final acceptance.
Company Profile
Shandong Jiantong Geosynthetics Co. Ltd. It is one of the factories of our Jiantong New Material Technology Group Co., Ltd., Which has four companies.
1)Shandong Jiantong Engineering Technology Material Co., Ltd.
Jiantong Engineering concentrated on product R& D and manufacturing according to the practical project's requirements.
2) Shandong Jiantong Plastic Engineering Co., Ltd.
Its principal business includes Engineering construction, design, providing complete sets of project solutions
3) Shandong Yuanheng Jiantong New Material Co., Ltd.
Focusing on international trade that imports the raw material from the suitable suppliers out of China and export our Geosynthetics to clients worldwide.
4) Shandong Jiantong Geosynthetics Co., Ltd.
We are concentrated on product R& D and manufacturing according to the domestic and international market order requirements.
Established on February 26, 2009, The first factory of Jiantong Group. is located in Lingcheng District, Dezhou, renowned for its Production Base of Geosynthetics in China, which has more than 200 employees, including more than 20 technical staff. And 18 international advanced production lines of geotechnical materials, including 8 geomembrane liner production lines (1 three co-extrusion production lines), 3 long fiber filament spun-bonded nonwoven production lines, 3 short fiber nonwoven production lines, 2 geonet drainage production lines, 2 GCL production lines. There are also particular testing devices and complete testing means.
We successfully passed ISO9001 International Quality System Certification, ISO14001 Environment System Certification, and ISO45001 Occupation Health Safety Management System Certification.
Our company enjoys a good reputation in the industry and is a member company of the China Nonwovens Association and China Technical Association on Geosynthetics.
Address:
Middle of Wuyou Street, Lingcheng Development Zone, Dezhou City, Shandong Province
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Apparel & Accessories, Construction & Decoration
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001
Company Introduction:
Shandong Jiantong Geosynthetics Co. Ltd. It is one of the factories of our Jiantong New Material Technology Group Co., Ltd., Which has four companies.
Shandong Jiantong Engineering Technology Material Co., Ltd.
Jiantong Engineering concentrated on product R& D and manufacturing according to the practical project′s requirements.
Shandong Jiantong Plastic Engineering Co., Ltd. Its principal business includes Engineering construction, design, and complete sets of project solutions.
Shandong Yuanheng Jiantong New Material Co., Ltd.
Focusing on international trade that imports the raw material from the suitable suppliers out of China and export our Geosynthetics to clients worldwide.
Shandong Jiantong Geosynthetics Co., Ltd.
We are concentrated on product R& D and manufacturing according to the domestic and international market order requirements.
Established on February 26, 2009, Shandong Jiantong Geosynthetics Co., Ltd. is located in Lingcheng District, Dezhou, renowned for its Production Base of Geosynthetics in China, which has more than 200 employees, including more than 20 technical staff. And 18 international advanced production lines of geotechnical materials, including 8 geomembrane liner production lines (1 three co-extrusion production lines), 3 long fiber filament spun-bonded nonwoven production lines, 3 short fiber nonwoven production lines, 2 geonet drainage production lines, 2 GCL production lines. There are also particular testing devices and complete testing means.
We successfully passed ISO9001 International Quality System Certification, ISO14001 Environment System Certification, and ISO45001 Occupation Health Safety Management System Certification.
Our company enjoys a good reputation in the industry and is a member company of the China Nonwovens Association and China Technical Association on Geosynthetics.